Updated Nov 22, 2026· 9 min read

Key takeaways

  • Compare the best smith machines for home gyms, from the complete Marcy SM-4033 cage to stack-loaded RitFit, DONOW, Mikolo and Major Fitness picks.

A smith machine guides a barbell along fixed steel rails, so you can squat, press, and lunge with the bar under control at every point of the lift. Rack the bar with a twist of the wrist, set the safety catches below your lowest position, and heavy compound work becomes far more manageable when you train alone. Modern home models go well beyond the guided bar, too: most of the machines in this guide combine the smith system with a power rack, a cable crossover, a lat pulldown, and storage, turning one footprint into the centre of a complete home gym.

Our top pick: Marcy Smith Machine Cage System SM-4033. Runner-up: Mikolo Smith Machine M4 with Cable Crossover.

As an Amazon Associate, I earn from qualifying purchases.

This guide compares five distinct smith machines sold for home use: a complete cage system from Marcy, a plate-loaded Mikolo cage, a weight-stack package from RitFit, a dual-stack DONOW system, and the Major Fitness Drone2. They differ in loading style, footprint, and how much equipment is bundled in, so the right pick depends on your space, your plates, and how you like to train.

How to Choose a Smith Machine

Loading style. Plate-loaded machines run the cables and smith bar off your own weight plates. They keep the purchase simpler and let you reuse plates you already own, but loading and unloading takes time between exercises. Selectorized weight stacks, like the RitFit and DONOW below, change resistance with a pin, which speeds up cable work and supersets. Check the pulley ratio as well: a 2:1 system moves the handle twice as far as the stack travels and feels smoother, while the weight you select reads higher than the resistance at the handle.

Bar path and bearings. Some smith bars travel straight up and down, while others follow a slight angle meant to track the natural arc of a press or squat. Linear bearings glide more smoothly under heavy loads than simple bushings, and the number of lock-out points along the rails decides how precisely you can set your starting position and safety stops.

Frame and capacity. Look at the steel gauge, the upright size, and how much each station holds rather than a single headline figure. The smith bar, the safety arms, the J-hooks, and the cable system each carry their own limit, and the smallest number governs the lift you are actually doing.

Footprint and ceiling height. These are large machines. Measure the assembled dimensions, then add working room in front for a bench and on the sides for loading plates. Most full-size systems stand between 85 and 89 inches tall, so confirm your ceiling clears the frame plus the pull-up bar before ordering.

Stations and storage. A smith bar alone covers the big lifts, but pull-up bars, dip handles, a landmine socket, and a low row expand the machine considerably. Built-in plate storage posts also matter more than they sound: a machine that stores its own plates keeps the floor clear and adds stability to the frame.

1. Marcy Smith Machine Cage System SM-4033

Specs

  • Model: SM-4033
  • Assembled cage dimensions: 70 in L x 84 in W x 86 in H
  • Included bench: 62 in L x 26 in W x 55 in H, with adjustable seat and back pad
  • Smith bar holds up to 300 lb; safety catches hold up to 300 lb
  • Bench holds up to 600 lb including user and weights; maximum user weight 300 lb
  • Stations: multi-grip pull-up bar, dip handles, landmine attachment, dual cable pulley system
  • Colour: Red

The Marcy SM-4033 is the classic complete-package approach: a smith cage, a power tower, a squat rack, and an adjustable utility bench arrive as one system. The guided bar runs inside a wide cage with safety catches, and a dual cable pulley system handles crossovers, pulldowns, and rows without leaving the frame. A multi-grip pull-up bar across the top offers wide, medium, and close grips, and a dedicated landmine attachment at the base adds pressing and rowing variations.

Because the bench is included, this is a sensible starting point for someone building a home gym from almost nothing. The trade-off is capacity: the smith bar and safety catches each hold up to 300 lb, which suits beginners and intermediate lifters but will eventually limit very heavy squats and presses. The footprint is also the widest in this guide at 84 inches, so it wants a garage or a dedicated room rather than a spare corner.

2. Mikolo Smith Machine M4 with Cable Crossover

Specs

  • Model: M4
  • Frame holds up to 2,200 lb in total
  • Independent dual pulley cable crossover system
  • Lat pulldown system with leg hold-down attachment
  • Silver aluminum pulleys
  • Integrated storage: 6 weight plate pins and 2 barbell holders
  • Colour: Black

Mikolo’s M4 builds the smith system into a full power cage and leans on your plates for resistance. Two independent pulley systems form the cable crossover, so each side can be set up for a different exercise, and the lat pulldown station includes a leg hold-down attachment to keep you anchored on heavy sets. The listing highlights silver aluminum pulleys, a step up from the plastic wheels found on many plate-loaded cages.

Storage is a genuine strength here: six plate pins and two barbell holders are built into the frame, which keeps the training area tidy and the cage planted. The headline figure is a 2,200 lb total frame capacity, well beyond what the smith bar alone should be loaded with, but it speaks to an overbuilt frame. Buyers who already own a good supply of Olympic plates get the most from this design, since nothing about the resistance is included beyond the machine itself.

3. RitFit M1 Pro Smith Machine Package with Weight Stack

Specs

  • Model: M1 Pro (RF-BPC06)
  • Frame: 2 x 2 in 14-gauge steel uprights
  • Dimensions: 79.1 in L x 63 in W x 85.3 in H; footprint 20.9 sq ft
  • Smith bar: linear bearing design, 33 lb bar, holds up to 352 lb, 11 height settings
  • Weight stack: 264 lb total with a 2:1 pulley ratio, dual cable crossover and lat pulldown
  • Frame holds up to 1,600 lb; pull-up bar holds up to 465 lb; safety arms hold up to 575 lb
  • Includes J-hooks, dip handles, landmine attachment, and 6 plate storage bars

The M1 Pro is the organised option: a linear-bearing smith bar, a selectorized 264 lb weight stack for the cables, and a full power cage in a footprint of about 21 square feet, the most compact in this guide. Pin-loaded cable changes keep workouts moving, and because the cage includes J-hooks and safety arms, you can also lift with a free barbell outside the smith rails when you want the stabilisers involved.

RitFit publishes unusually complete numbers for this machine, which makes planning easier: the smith bar itself holds up to 352 lb, the safety arms 575 lb, and the pull-up bar 465 lb. The 2:1 pulley ratio gives the crossover a long, smooth pull that suits flyes and press-downs. For a single-car garage gym or a basement corner, this balance of stack convenience and modest footprint is hard to beat.

4. DONOW Smith Machine with Weight Stacks DN-DS938N

Specs

  • Model: DN-DS938 Series (DN-DS938N configuration)
  • Dimensions: 54.7 in L x 78.58 in W x 88.3 in H
  • Dual weight stacks: 352 lb total, 2:1 cable ratio
  • Frame holds up to 2,240 lb
  • Included components: smith machine, leverage bar, cable handles, lat pulldown bar, cable bar, tricep rope, ankle strap
  • Ships in 8 boxes

DONOW’s DN-DS938N answers the plate-loading question with two enclosed weight stacks totalling 352 lb, the largest stack capacity in this guide. Pin changes replace plate changes on every cable exercise, and the enclosed stacks keep the machine looking tidy and the moving parts away from hands and pets. The frame carries a 2,240 lb maximum recommendation, and at 88.3 inches it is also the tallest machine here, so ceiling height is the first measurement to check.

The attachment bundle is generous: a lat pulldown bar, a straight cable bar, a tricep rope, an ankle strap, handles, and a leverage bar cover most cable and landmine work out of the box. Assembly is the commitment — the system ships in eight boxes — but for a lifter who wants stack convenience and a high ceiling of resistance without buying plates for the cables, this is the heavy-duty route.

5. Major Fitness Drone2 Advanced Training Smith Machine

Specs

  • Model: Drone2 (D2AW)
  • Frame material: alloy steel
  • Dual lat pull-down systems and cable crossover machine
  • Aluminum pulley set
  • Smith bar included
  • Colour: Black

The Drone2 takes the all-in-one formula and tidies it up with an aluminum pulley set, which Major Fitness fits for smoother, quieter cable travel than standard wheels. Dual lat pull-down systems and a cable crossover flank the smith station, so pressing, pulling, and cable work all happen inside one alloy steel frame, and the smith bar is included rather than sold as an add-on.

This machine-only configuration (the D2AW package) suits buyers who already own a bench and plates and simply want the central station upgraded. It is the streamlined choice of the five: fewer bundled extras than the Marcy or DONOW, but a cleaner frame built around the lifts most home gym owners actually repeat week after week.

Comparison Table

Product Loading Style Cable System Assembled Height Smith Bar Holds Up To
Marcy SM-4033 Plate-loaded, bench included Dual pulley crossover 86 in 300 lb
Mikolo M4 Plate-loaded Independent dual pulley crossover — Frame total 2,200 lb
RitFit M1 Pro 264 lb weight stack Dual crossover, 2:1 ratio 85.3 in 352 lb
DONOW DN-DS938N Dual stacks, 352 lb total Dual crossover, 2:1 ratio 88.3 in Frame total 2,240 lb
Major Fitness Drone2 Plate-loaded Dual lat pulldown and crossover — —

Frequently Asked Questions

How much space does a home smith machine need?

Plan for the assembled footprint plus working clearance. The machines in this guide range from about 21 square feet for the RitFit M1 Pro to the Marcy SM-4033 at 70 by 84 inches, and you still need room in front for a bench and at the sides for loading plates. Heights run from 85.3 to 88.3 inches, so measure your ceiling, especially in basements and garages with low joists or door openers.

Is a smith machine good for training alone?

Yes, that is one of its main strengths. The bar is captive on rails and can be re-racked at any point with a rotation of the wrists, and adjustable safety catches can be set just below your lowest position on squats and presses. That combination removes the need for a spotter on most heavy work, though good form still matters as much as it does with a free barbell.

Should I choose plate-loaded cables or a weight stack?

Choose a weight stack if you change resistance often, share the machine with others, or dislike loading plates between sets; the RitFit and DONOW above work this way. Choose plate-loaded cables, like the Mikolo and Major Fitness, if you already own plenty of plates and want the machine itself to stay simpler. Neither is stronger by default; check each station’s individual limit instead.

Can I use a free barbell with these machines?

On some of them, yes. The RitFit M1 Pro includes J-hooks and safety arms for free barbell work in the cage, and the Marcy SM-4033 includes a squat rack function alongside the smith bar. The smith bar itself is captive and cannot be removed, so if free barbell lifting is central to your programme, confirm the rack stations and their limits before choosing.

Conclusion

For a complete starter system with the bench included, the Marcy SM-4033 covers the most stations in one purchase. The Mikolo M4 suits plate owners who want an overbuilt cage with excellent storage, while the RitFit M1 Pro packs a weight stack and a free-weight cage into the smallest footprint here. The DONOW DN-DS938N offers the biggest stacks and the tallest frame for lifters with the ceiling to match, and the Major Fitness Drone2 keeps things streamlined with aluminum pulleys and a machine-only package. Measure your space, decide how you want to load the cables, and any of the five will anchor a capable home gym.

C
Celery Furniture Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Smith Machines for Home Gyms: 5 Picks…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Wedding Registry

Collect the home and kitchen items you want in one registry that guests can shop from.

Create a wedding registry
Subscribe & Save

Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.

Explore Subscribe & Save
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.